Power generators

gen banner

Giussani offers a complete range of products for power generators: compression latches, wafer camlocks, quarter turn locks, hinges and gaskets. The fuel cap will be available very soon.
 
The idea is to provide a kit or selection of products that can be used with the same key!
 
generatori key alike
 
 
Here are some of our recommended products for this application.
 

G5A - G5B
G5A - G5B

Tumbler lock with 400 combinations. Two numbered nickel-plated keys. Numbered cylinder with cap in stainless steel with dustcover.Housing in zinc die-casting alloy with stainless steel cap. Accessories on request (see page A2-300). Cam Series 2 has to be ordered separately. Packing: boxes of 50 pcs.

 

 

Product series: G5 locks

Published in Wafer camlocks
GA
GA

Self-gripping gasketing
 

 

Published in Gasketing
HA
HA

Special black mat finish, glass-fibre reinforced polypropylene technopolymer. Resistant to solvents, oils, greases and other chemical agents. Fitting by means of socket head screws. Suitable for normal use and maximum working temperature of 100° C. Packing: 20÷50 pcs.
 

  • Download:
  • Data sheet
  • Register or log in to download the 3D

 

MK
MK

The plate is made of polyamide, the T-handle is made of painted zinc alloy. The keys are numbered and made of Nickel-plated brass. There are three types of locks available on request. The lock allows the opening of the T-handle. Its rotation 90° right or left moves the side cam. The grip range H is adjustable from 13mm to 75mm or from 43mm to 75mm. A silicone gasket is integrated with the plate and provides the rating IP65 of the product. The mounting can be performed using the 4 cast-in bolts with nuts included. The opening of the handle can be verified by an optional microswitch supplied separately on request and protected by a padlock (not provided) with maximum diameter 9 mm. Packing: box of 25 pcs.
 

  • Download:
  • Data sheet
  • Register or log in to download the 3D

 

Published in Compression latches
MY
MY

Plate and handle in black painted zinc alloy. The lock, provided with 2 keys, unlocks the button for opening the handle which turning moves the compression mechanism. Height H adjustable depending on the length of the cam. Plate protection to IP65. Panel thickness from 1 to 10 mm. Packing: box of 40 pcs.

 

  • Download:
  • Data sheet
  • Register or log in to download the 3D

 

Published in Compression latches
MY2
MY2

Plate and handle in black painted zinc alloy. The lock, provided with 2 keys, unlocks the button for opening the handle which turning moves the compression mechanism. Height H adjustable depending on the length of the cam. Panel thickness from 1 to 5 mm. Packing: box of 40 pcs.

 

 

Published in Compression latches
NB
NB

Big size key in polyammide with insert in nichel-plated alloy. Anatomic handle. Packing: 100 pcs. In boxes.

 

 

NRA
NRA

Quarter-turn in self-extinguishing UL94 V-0 polyamide for quick fixing. Key rotation 90° right hand/left hand. Protection against dust and streams of water according to IP65. Suitable for sheet thickness from 1 mm up to 2 mm. Cams in polyamide or in galvanized steel supplied already assembled on the lock. Packing: boxes of 100 pcs.

 

 

Product series: Box Rapid

Published in Quarter turn locks
NZ
NZ

Quarter-turn in chromium-plated zinc die-casting alloy for switchboards. Key rotation 90° right hand / left hand. Different insert types available. Protection against dust and streams of water according to IP65. Sheet largest thickness mm. 8. Accessories on request (see page B2-210).

 

 

Published in Quarter turn locks
ZM - ZMC
ZM - ZMC

Hinge in zinc die-casting alloy. Finish surfaces: painted in mat black colour or chromium-plated. Resistant to solvents, oil, greases and other chemical agents. Suitable for RH and LH doors. AISI 303 stainless steel rotation pin. Rotation angle: max 270°. Packing: 50 pcs.

  • Download:
  • Data sheet
  • Register or log in to download the 3D

 

Product series: Zinc alloy hinges

Published in Hinges