HVAC Systems

hvac banner

CK
CK

Hinge with adjustable friction. Provided with screw with the possibility to adjust the resistant torque of the door on which it is assembled. Special technopolymer (on polyamide based) reinforced with glass fibers. Black colour. Rotation pin and nut in stainless steel AISI 304. Maximum angle of rotation 180 °. Packing: 30 pcs.
 

  • Download:
  • Data sheet
  • Register or log in to download the 3D

 

Product series: Polyamide hinges

Published in Hinges
G5X
G5X

Tumbler lock with 400 combinations. Two numbered nickel plated keys. Cylinder and housing in stainless steel AISI 316L. Accessories in stainless steel for the lock mounting. Stainless steel cam Serie 2C/2CP to be ordered separately. Protection against dust and streams of water according to IP65. Resistance to salt fog: 500h. Under particularly hard conditions it is advisable to use the protective cap. Packing: boxes of 50 pcs.

 

 

Product series: G5 locks

Published in Wafer camlocks
GA
GA

Self-gripping gasketing
 

 

Published in Gasketing
NF
NF

Quarter-turn in zinc die-casting alloy for switchboards.Key rotation 90° with inner spring.Different insert types available. Protection against dust and streams of water according to IP65. Cam series 2 to be ordered separately. Accessories on request (see page B2-200). Packing: 100 pcs. in boxes.

 

 

Published in Quarter turn locks
NW
NW

Quarter-turn in stainless steel AISI 304 or 316 for switchboards. Key rotation 90° right hand / left hand. Different insert types available. Protection against dust and streams of water according to IP66 / IP69K. Sheet largest thickness 7.5 mm. Accessories on request (see page B2-210). Inner washer, nut and screw are available always in stainless steel AISI 304. Packing: boxes of 50 pcs.

 

 

Published in Quarter turn locks
NX
NX

Quarter-turn in stainless steel AISI 304 or 316 for switchboards. Key rotation 90° right hand / left hand. Different insert types available. Protection against dust and streams of water according to IP65. Sheet largest thickness mm. 8. Accessories on request (see page B2-210). Inner washer, nut and screw are available always in stainless steel AISI 304.  Packing: boxes of 50 pcs.

 

 

Published in Quarter turn locks
NZ
NZ

Quarter-turn in chromium-plated zinc die-casting alloy for switchboards. Key rotation 90° right hand / left hand. Different insert types available. Protection against dust and streams of water according to IP65. Sheet largest thickness mm. 8. Accessories on request (see page B2-210).

 

 

Published in Quarter turn locks
ZA - ZAC
ZA - ZAC

Hinge in zinc die-casting alloy. Finish surfaces: painted in mat black colour or chromium-plated. Resistant to solvents, oil, greases and other chemical agents. Galvanized steel rotation pin. Suitable for single RH and LH doors. Rotation angle: 180°. Packing: 50 pcs.

 

  • Download:
  • Data sheet
  • Register or log in to download the 3D

 

Product series: Zinc alloy hinges

Published in Hinges